Place pins for
a
Simple 8 Division, using either measurements or a paper strip. This
demo uses the paper strip. Use red pins for N/S poles, and alternating
colors (yellow and blue here).
|
Place marking lines for
four
pins only (here, the yellow pins were used) but leave all the pins in
place.
|
Determine the measurement
or use
the paper strip to determine the distance half way from obi (midpoint)
to pole; place pins on the "blue pin" imaginary lines. Be sure to keep
this alignment straight and true. Do this on both north and south
hemispheres.
|
These photos
show how
things look with all of the pins placed.
|
Using the blue pins as the
starting centers, proceed as though it was a C8, "missing" four polar
division lines. Enter thread at the blue pin, and wrap to the diagonal
pins, back again.
|
